Ceramic Snowfoam

Ceramic Snowfoam

A ceramic infused, foaming lance applied protective coating. The cutting edge technology means that it is quick and easy to give hydrophobic protection for up to 3+ months. Specifically formulated for use with a foam lance and pressure washer, it provides a thick blanket of foam, making it safer to use than a traditional spray and rinse sealant by reducing the risk of marking the paint work. 

DIRECTIONS FOR USE

Ensure the vehicle is cleaned
thoroughly prior to application.
Ensure the surfaces
are cool to the touch and out of
direct sunlight.
1) Dilute the product with a ratio
of 1 part product to 4 parts
water e.g, 200ml product &
800ml water.
2) Apply a blanket foam to one
section of the vehicle
3) Immediately rinse thoroughly
using a pressure washer
4) Dry with a drying towel
removing all residues.
5) Clean the windscreen and
wiper blades with glass clear

CAUTION
KEEP OUT OF REACH FROM
CHILDREN AND PETS.
HEALTH & SAFETY
Harmful if swallowed.
May cause allergic skin
reaction. If product comes into
contact with eyes, cautiously
rinse with water for several
minutes. Remove contact
lenses if applicable and easy
to do so. Continue to rinse
with plenty of water for
several minutes. If in contact
with skin rinse with plenty of
water. If problem persists, seek
medical attention.

STORAGE

Protect from frost. Do not allow product to freeze. Store product in
ambient temperatures above 6 Degrees C and below 25 Degrees C. Exposure to severe temperatures will cause irreversible damage to the product.

HEALTH & SAFETY

Not classified. Keep out of reach of children. Read label before use.